Corrugation Gum Powder

Product Details:

Our Pasting Gum powder is made from the best quality Starch and is widely used by Corrugation Industries having a Semi-Automatic Pasting machine. Such Corrugation Industries prefer to use our product for its cost effectiveness and quick drying behaviour. Because of the strong bond, Stiffness and Burst Strength of the Sheet Pasted Board are markedly improved.

This product is to be mixed with 3 times the quantity of water in a mechanical agitator till the slurry is free from any lumps. The required quantity of caustic soda is to be added. (Care must be taken in handling caustic soda. Protective Goggles and Gloves have to be used.) Continue stirring till you get a a transparent gum . Extra water can be added to arrive at the machine acceptable viscosity. The gum is to be filtered in a fine mesh nylon cloth and then used in the Board Pasting machine. For 1 kg powder you will get 4 kg Quality Liquid Gum. 

Physical Properties:

• Color and Appearance : White Powder
• Odour : Nil
• Ph : 7 to 8.0
• Mixing Ratio : 1:3
• Viscosity in B-4 Cup After Mixing With Water and Caustic Soda : 60 to 80 Sec

STORAGE

The product as such can be stored in a dry place away from heat and moisture for 3 months. The prepared Liquid Gum can be stored upto 7 days.Request
Callback 

Product Details:

This is a powder gum specifically formulated for use in Automatic High Speed Corrugation and pasting in Single and Double Facer.

Additional Information:

• Packaging Details: HDPE bag with a plastic Liner Inside

Product Details:

This product is to be mixed with 1.5 times the quantity of water in a mechanical agitator till the slurry is free from any lumps. The required quantity of caustic soda is to be added. (Care must be taken in handling caustic soda. Protective Goggles and Gloves have to be used.) Continue stirring till you get a a transparent gum . Extra water can be added to arrive at the machine acceptable viscosity . The gum is to be filtered in a fine mesh nylon cloth and then used in the Board Pasting machine. For 1 Kg powder you will get 2.5 kg Quality Liquid Gum.

Additional Information:

• Packaging Details: HDPE bag with a plastic liner inside

Product Details:

A cost effective gum powder for Corrugation in Slow Speed machines.

Product Details:

FLUTE TO PAPERBOARD LAMINATOR GUM POWDER—955 is an adhesive specially prepared for bonding higher GSM paperboard to itself or to micro flute for display carton manfacture where quick tack coupled with high bond strength are required. The gum can be used in Fully Automatic Machines like Meiguang or semi automatic machines.
The liquid gum prepared using our Boardpaste Premium Gum Powder 955 can be used to bond paperboards as high as 1000 GSM.

SPECIAL FEATURES OF OUR GUM POWDER

1. We use only First Quality Starch for processing.

2. No low quality starch like thippy is used. This can be verified by the appearance of the liquid gum prepared using our Gum Powder. It will be transparent, golden yellow and look like honey without any opaque or hazy appearance. The liquid gum will not separate into two layers on storage. Also it will be stable and can be used even after 15 days without any loss of adhesive nature.

3. The liquid Gum prepared using our Gum Powder gives a hard film on drying. So the bonded paperboard will have improved stiffness, compression and Burst strength.

4. The liquid Gum prepared using our Gum Powder will be quick drying and hence the Pasted boards can be immediately taken up to the next stage of operation thereby increasing the productivity.

6. One Kg of Boardpaste Premium Gum Powder 955 will give 3 Kg of High Quality Liquid Gum.

APPLICATION

GUM POWDER 955 is to be mixed with  twice the quantity of water in a mechanical agitator till the slurry is free from any lumps. The required quantity of caustic soda is to be mixed with equal quantity of  water and then added to the gum powder slurry. The slurry will become a transparent thick jelly on continued stirring for about 1 hour. Extra water can be added to arrive at the machine specific viscosity. The gum is to be filtered in a fine mesh nylon cloth and then applied using roller, wheel or nozzle applicators using Meiguang or any automatic machine.

 

STORAGE

 GUM POWDER  955 can be stored in a dry place away from heat and moisture.

HANDLING

No special precautions are needed in handling this product.

 

 

 

 

Additional Information:

• Item Code: 955
• Pay Mode Terms: Other
• Port of Dispatch: CHENNAI
• Production Capacity: 100 MT per month
• Delivery Time: Depends on Quantity
• Packaging Details: 25 Kg HDPE bag with Poly Liner inside

Product Details:

Our Corrugation Gum powder is made from the best quality Starch and is widely used by Corrugation Industries having a Semi-Automatic machine. Such Corrugation Industries prefer to use our product for its cost effectiveness and quick drying behaviour. Because of the strong bond, Stiffness and Burst Strength of the Corrugated Board are markedly improved.

PHYSICAL PROPERTIES

Color and Appearance: White PowderOdor: NILPH: 7 to 8.0Mixing Ratio: 1:4Viscosity in B-4 Cup: 30 to 60 sec
Corrugation Gum Powder is to be mixed with four times the quantity of water in a mechanical agitator till the slurry is free from any lumps. The required quantity of caustic soda is to be added. (Care must be taken in handling caustic soda. Protective Goggles and Gloves have to be used.) Continue stirring till you get a a transparent gum . Extra water can be added to arrive at the machine acceptable viscosity ( usually around 30 to 35 sec in B-4 Cup ). The gum is to be filtered in a fine mesh nylon cloth and then used in the Corrugation or Sheet Pasting machine. For 1 Kg powder you will get 5 kg Quality Liquid Gum.

STORAGE

The product as such can be stored in a dry place away from heat and moisture for 3 months. The prepared Liquid Gum can be stored upto 7 days.

Additional Information:

• Packaging Details: HDPE bag with a plastic liner inside

Product Details:

Our product is in powder form and is to be mixed with required water and heated. On heating very good quality liquid gum is obtained. This gum can be stored upto a week.

Product Details:

A hot process gum powder for paper plate manufacture.